Nicholl Thermal Conductivity Cars Nicholl thermal conductivity bar, Thermal Conductivity Meter Nicholl thermal conductivity bars test the conductivity of 4 metals at once. Steel, brass, aluminum, and copper strips are connected to a strip thermometer and mounted on a plastic base. Dip the ends into a temperature water bath and teach heat conduction. Dimensions: metal strips, 5-1/4" L x 3/8" W _ 3/8" D; plastic base, 7" L. Includes instructions.
Read MoreSend InquiryWhat the heck is a heat conductometer? Well, a heat conductometer is used for comparing the thermal conductivity of five metals: aluminum, brass, steel, nickel, and copper. The 5 spokes radiate from a brass hub. Each rod is marked on the rods. There are notches in each rod to hold the wax, which is an essential tool for testing the thermal conductivity. Each unit comes with a supply of wax and an instruction manual.
Read MoreSend InquiryHeat Conduction Experiment is comprised of copper, Brass, aluminum, steel. An effective tool for demonstrating the coefficient of the expansion of metals. The rod is placed inside a tube that has both an Inlet and Outlet for steam. Compare the expanded length of the rod to the temperature difference before and after the rod expands by using a thermometer. The extent of the rod's expansion is measured by a micrometer.
Read MoreSend InquiryWhen the alcohol lamp is lighted, the heat absorbing block absorbs heat, and the heat is conducted to the heat conducting rod, and the wax block is melted. Thermal Conductivity Apparatus is observed that the wax block of the heat conducting rod is melting fast, that is, the heat conduction performance of the rod is good.
Read MoreSend InquiryThe floor is equipped with a disk for storing alcohol lamp. Also Linear Expansion Apparatus equipped with an aluminum cover, used to control the flame. The overall size is about: 282*226*92mm.
Read MoreSend InquiryEach Metal Block calorimeter is drilled with two holes, a large central hole, 12.5 mm diameter, for a special immersion heater and a smaller hole 7.5 mm diameter, for a thermometer or temperature sensor. Accuracy is plus/minus 2%
Read MoreSend Inquiry